Course Description
Gravitec’s Competent Fall Protection Person Refresher Course is an intensive program that covers the use, selection and installation of conventional and non-conventional fall protection equipment. Re-emphasizing the use of a planned approach to working at heights, this course begins with a discussion about the changes to the ANSI/ASSE Z359 Fall Protection Code. It also introduces the latest fall protection tools and fall protection methods utilized to protect workers from the various fall hazards encountered at job sites with an overview of commercially available fall arrest systems. The function of each piece of equipment is discussed followed by extensive hands-on exercises for a complete fall protection learning experience. This course also addresses relevant fall protection regulations and fall hazard identification. These components, combined with the hands-on set-up of fall protection systems, instill a working knowledge of all the essential elements of a fall protection program. The course curriculum includes both classroom sessions and practical hands-on exercises. Written and practical tests are administered to ensure that students understand the principles presented. Documentation is available to satisfy your company’s due diligence and regulatory requirements.
This course is not a fall protection trainer course. Participants who complete this course are not certified to conduct fall protection training. Refer to the Fall Protection Trainer Course for information about becoming a fall protection trainer.
This course meets the Criteria for Accepted Practices in Safety, Health, and Environmental Training (ANSI/ASSE Z490.1-2001), the highest industry standard for training. It also meets the Competent Person re-training requirements outlined in ANSI/ASSE Z359.2-2007, Minimum Requirements for a Comprehensive Managed Fall Protection Program, found in the ANSI/ASSE Z359 Fall Protection Code (Section 3.3.4.5).
Gravitec can supply all necessary fall protection equipment for this course.
No cameras, camcorders, cell phones, pagers, personal digital assistants or similar devices will be permitted during training.
Prerequisites
Competent Fall Protection Person training from Gravitec no longer than two years prior to enrollment
Course Duration
2.5 Days (20 Hours)
The length of this course can be adjusted based on the amount of fall protection equipment used in the student's workplace.
Class Size
Minimum 8, Maximum 10 (1 Instructor); Minimum 14, Maximum 18 (2 Instructors)Learning Objectives
Upon completion of this course, students will be capable of identifying existing and predictable fall hazards in the workplace and taking corrective measures to eliminate them through the selection, installation and use of appropriate fall protection systems. The Competent Fall Protection Person Supervisor will be capable of implementing and managing (in a supervisory capacity) fall protection systems in a variety of locations and conditions. Students will also learn how to write fall protection procedures.
Students will have advanced knowledge of the following:
- Fundamentals of Fall Protection
- Anchorage Requirements
- Energy Absorbing Lanyards
- Function and Purpose of Energy Absorbers
- Fall Protection Hardware Compatibility
- Work Positioning Systems
- Inspecting Fall Protection Systems
- Installing Fall Protection Systems
- Calculating Required Clearances
- Determining Acceptable Anchorages
- Selecting Fall Protection System Components
- Hierarchy of Fall Protection
- Conventional Fall Protection (Guarding Systems)
- Standards and Regulations Affecting the Fall Protection Industry
- Recognizing and Identifying Fall Hazards
- Donning a Full Body Harness
- Self-Retracting Lifelines
- Vertical Lifelines
- Horizontal Lifelines
- Engineered Horizontal Lifelines
- Ladder Climbing Devices
- Rescue Theory
- Troubleshooting Fall Restraint Systems and Fall Arrest Systems
- Setting Up and Using Temporary Systems
- Fall Protection Plans and Written Fall Protection Procedures
- Detailed Inspection, Care and Maintenance
- Anchorages: Certified and Non-Certified
- Rescue and Applications in Fall Protection
- Fall Protection Regulations (OSHA) and Fall Protection Standards (ANSI)
Resource Materials
Students will receive a plastic wallet certificate and Gravitec’s Competent Fall Protection Person Manual and access to our toll-free number for ongoing technical assistance.Course Credits
2.0 Continuing Education Units, accredited through the International Association for Continued Education and Training (IACET), are awarded upon completion of this course.
